Tecnica 190 Tig  DC-LIFT VRD

Tecnica 190 Tig DC-LIFT VRD

Tecnica 190 Tig DC-LIFT VRD

Tecnica 190 Tig DC-LIFT VRD

In stock

TIG (LIFT striking) and MMA inverter welding machine in direct current (DC).
Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys.
The Voltage Reduction Device (VRD) is used to decrease the output voltage to a safe level when the welding machine is on but not in welding conditions. This grants the operator’s safety: he can come into contact with the electrode without risks, until welding operations are resumed. (for use in damp environment such as mines or shipyards, etc.).
Features:
– compact and light;
– display to check welding current;
– MMA regulations: arc force and hot start;
– MMA electrodes: rutile, basic, stainless steel and cast iron;
– thermostatic, overcurrent, overvoltage, undervoltage, motorgenerator (+/-15%) protections.
Complete with TIG/MMA welding accessories and plastic carry case.

Description

Technical Data
MOTOR MINIMUM POWER 6 kW
SINGLE PHASE MAINS VOLTAGE 230 V
MAINS FUSE 16 A
MAINS FREQUENCY 50 / 60 Hz
EFFICIENCY 86%
CURRENT RANGE 10 – 170 A
POWER FACTOR 0,7
%USE (20°C USE) 88% @ 150A
D. USABLE ELECTRODES IN DC 1,6 – 4 mm
MAX CURRENT 160 @ 20 % A
PROTECTION DEGREE IP23
DC CURRENT 110 A
DIMENSIONS 38 x 42 x 17 cm
MAX NO LOAD VOLTAGE 78 V
WEIGHT 9,4 kg
MAX ABSORBED CURRENT 29 A
ABSORBED CURRENT AT 60% 17 A
PIECES/PALLET 36 pz/pallet
MAX ABSORBED POWER 4,4 kW
PIECES/PALLET B30 pz/pallet B
ABSORBED POWER AT 60% 2,6 kW